Right hand cutting solid reamers with extra long shanks.
The front end of these reamers is ground to act as pilot. The
cutting edges are precision ground with a gradually increasing
clearance angle to eliminate chattering and to permit easy and
smooth chip formation. The reamers are provided with a hard chromium
coating. The very hard chromium coating reduces friction, giving
improved chip flow and reducing the tendency for builtup edges. TiN
coating is available on request.
Standard sizes: Dia. 4-12 mm, Cutting length 70 mm, Total length 234 mm.
Right hand cutting reamers with adjustable blades and extra long
shanks. Specially precision ground cutting edges with gradually
increasing clearance angle eliminate chattering and permit easy and
smooth chip formation. The reamers are also available with hard
chromium coated blades (Series HC) to further improve the cutting
performance. An optional seat bushing is available for each reamer
size. The seat bushing centers firmly in the valve seat so that the
reamer aligns perfectly with the bore.
Standard sizes: Dia. 5,4-12 mm, Cutting length 28-36 mm, total
length 160-220 mm.
Rigth-hand cutting reamer with expanding blades. Due to the
unique relief grinding operation the blades have a progressively
increasing clearance angle giving a softer cutting action. The
standard reamer for repair and assembly jobs.
Standard sizes: Dia. 6,4-110 mm, Cutting length 32-150 mm, Total length 111-490 mm.
Rigth-hand cutting reamer with expanding blades.Extra long blades!
The blades are approximately 2/3 longer than the blades of reamer
type D. Due to the unique relief grinding operation the blades have
a progressively increasing clearance angle giving a softer cutting
action. The reamer for reaming longer holes and adjacent inline
holes. Standard sizes: Dia. 10,5-55 mm, Cutting edge 65-180 mm,
Total length 160-425 mm.
Rigth-hand cutting reamer with expanding blades. Parallel shank
with square at the back and integral pilot with sliding cone bush at
the front of the reamer. Due to the unique relief grinding operation
the blades have a progressively increasing clearance angle giving a
softer cutting action.
The precision reamer for inline reaming of holes. The cone bush
holds the reamer in exact alignment when reaming two holes.
Standard sizes: Dia. 7-110 mm, Cutting length 32-150
mm, Total length 175-700 mm.
Rigth-hand cutting reamer with expanding blades. Exchangeable
pilots at the front as well as at the back of the reamer. Each pilot
is provided with square and sliding cone bush. A special bayonet
coupling with mating cones between each pilot and the reamer body
ensures correct alignment. The blades are ground for taking a
rough cut followed by finish reaming. Due to the unique relief
grinding operation the blades have a progressively increasing
clearance angle giving a softer cutting action. The universal reamer
for all types of holes, particularly for inline reaming of two or
more holes. The cone bushes provide for exact alignment between the
hole being reamed and the other mating holes.
Standard sizes: Dia. 12-66 mm, Cutting length 30-60
mm, Total length 250-500 mm.
Right-hand cutting shell reamer with expanding blades. The reamer
fits on a tool bar and may be positioned along the tool bar at any
desired position. The reamer is automatically locked in place on the
tool bar by an ex-panding spring coupling as soon as the reamer
blades are brought into
engagement with the bore. Expanding tool bar guides and supporting
fixtures for the tool bar are
available to ensure excact alignment of the tool bar when reaming a
series of aligned holes. The reamer for inline reaming of a
series of holes, particularly the holes of crankshaft and camshaft
bearings.
Standard sizes: Dia. 36-111 mm, Cutting edge 44-60
mm, Total length 96-127 mm.