The universal cut-off machine with automatic cutting axis

The machine can be used to cut-off tool blanks to any length, broken milling and boring tools,  to slit coolant hole slots and many other applications. An automatic work piece loading is also possible through the X-axis.

The powerful spindle drive together with the servo-drive and the modern CN (with a programmable feed) result in an optimum cutting performance.

The 3-point clamping device holds the work piece on both sides of the disc and prevents burrs and chipping. The optional pneumatic clamping device is operated through a foot switch.

The hood and the disc protection as well as the end limit gauges, the pressure control gauge and an easily readable screen in the front of the machine make this machine very safe and comfortable to use.

The coolant jet through the disc protection is directly aimed at the cutting point resulting in a good cooling and rincing of both work piece and disc, and also increases the work life of the disc. The coolant supply is automatically interrupted at the end of the cycle to take out the work piece.

The results are short clamping times and a very high optical and technical cut-off quality in respect of surface quality, tolerances and grinding without burrs and chippings. In most cases, subsequent grinding operations will no longer be necessary.

  • Compact cut-off machine with high performance
  • Universal use, for instance for grinding of coolant hole slots
  • Fully automatic cutting-off until Æ 50 mm
  • No additional operations like deburring and facing
  • Safety thanks to workspace housing and grinding disc protection

 

Technical data

Cut-off Ø until 50 mm
Grinding disc Ø 200mm
Motor with 1,5 kW (3kW optional)
Grinding feed 0,1-1mm/s
Power supply 400V 3ph-50Hz
Painting RAL 7035 (light grey)
Weight about 400 kg
Dimensions LxWxH 95x82x195 cm

 

See more:

https://www.youtube.com/watch?v=qNOHT-KHO_g

https://www.youtube.com/watch?v=1UeyK5ljnr0

https://www.youtube.com/watch?v=sjqEsH3SIz8

 

 

Go to top